Royco 308CA is a highly refined mineral oil based lubricating oil blended with modern additives for rust and corrosion inhibition and improved water displacing characteristics.
Royco 308CA is designated as a P-9 rust-inhibitor.
Applications:
ROYCO 308CA was developed for the lubrication and protection against corrosion of small arms and automatic weapons however, it may be used as a general-purpose lubricant in all applications where water displacement, water resistance, corrosion protection and/or low temperature performance is required.
ROYCO 308CA is an excellent lubricant for locks, hinges, electric motors, chains, and fishing, hunting and camping equipment.
For small engine storage, pour slowly into the throat of the carburetor until the engine stalls.
The engine is now preserved internally and assures that no gums or corrosion will develop during storage and that valves will not stick during start-up.
Advantages:
- Excellent rust and corrosion resistance
- Outstanding water resistance
Compatibility:
ROYCO 308CA is not recommended as a lubricant at temperatures below -70oF. For operation at extreme low temperatures ROYCO 363 is advised.
Approvals:
ROYCO 308CA meets all requirements and is qualified to Federal Specification: MIL-PRF-32033, which super- sedes and replaces VV-L-800C.
PROPERTIES | ROYCO 308CA |
Pour Point oC | -66 |
Cloud Intensity -65oF/72 hrs. | PASS |
Flash Point COC °C | 150 |
Viscosity cSt | |
@ 40°C | 11.3 |
@ -40°C | 4,575 |
@ -54°C | 49,000 |
Copper Corrosion, 3 hr/100°C | 1A |
Precipitation Number | 0.00 |
Galvanic Corrosion | PASS |
Rust Protection 110°F/168 hrs. | PASS |
Film Characteristics even coat | PASS |
Removeability | PASS |
Water Displacement | PASS |
Shell 4 Ball Wear mm2 | 0.80 |
Evaporation % wt. 100oC/22 hrs. | 10.5 |
Specific Gravity 60°F | 0.889 |
Oxidation - Corrosion Stability 250°F/168 hrs. | |
Copper mg/cm2 | 0.02 |
Aluminium mg/cm2 | 0.10 |
Steel mg/cm2 | 0.01 |
Magnesium mg/cm2 | 0.10 |
Cadmium mg/cm2 | 0.01 |
Viscosity Change % | 9.1 |
T.A.N. Change | 0.10 |
